try fix segfault

main.go

@@ -51,7 +51,7 @@ func normalizeArch(arch string) string {
 func setup(arch string) *dagger.Container {
 	tarball := "guix-binary-" + guixVersion + "." + arch + "-linux.tar.xz"
 	return dag.Container(dagger.ContainerOpts{Platform: platformFor[arch]}).
-		From("debian:stable-slim").
+		From("debian:bookworm-slim").
 		WithEnvVariable("DEBIAN_FRONTEND", "noninteractive").
 		WithExec([]string{"apt-get", "update"}).
 		WithExec([]string{"apt-get", "install", "-y", "--no-install-recommends",

patch.sh

@@ -47,56 +47,71 @@ if ! grep -q "Good signature" <<< "$VERIFY_OUTPUT"; then
 fi
 echo "verified pinned commit signature"
 
+# Replace a fixed string that occurs on exactly one line, aborting if the count
+# is not 1 (the assert mirrors the old python3 patches, without depending on a
+# Python interpreter that turned out to segfault in the container). $needle is
+# matched literally by grep; $sed_expr is the equivalent GNU sed substitution.
+replace_once() {
+  local file="$1" needle="$2" sed_expr="$3" n
+  n="$(grep -Fc -- "$needle" "$file")"
+  if [ "$n" != "1" ]; then
+    echo "error: expected one '$needle' in $file, found $n" >&2
+    return 1
+  fi
+  sed -i "$sed_expr" "$file"
+}
+
 # Route shepherd's log to the console, so boot failures are visible on screen
 # instead of only in /var/log/messages.
-python3 - "$SRC" <<'PY'
-import sys
-from pathlib import Path
-p = Path(sys.argv[1]) / "gnu/services/shepherd.scm"
-s = p.read_text()
-old = '''      ;; Start shepherd.
-      (execl #$(file-append shepherd "/bin/shepherd")
-             "shepherd" "--config"
-             #$(shepherd-configuration-file services shepherd)))))'''
-new = '''      ;; Start shepherd.  Log to the console so boot failures are visible.
-      (execl #$(file-append shepherd "/bin/shepherd")
-             "shepherd" "--config"
-             #$(shepherd-configuration-file services shepherd)
-             "--logfile" "/dev/console"))))'''
-assert old in s, "shepherd-boot-gexp execl not found"
-p.write_text(s.replace(old, new, 1))
-print("patched shepherd-boot-gexp")
-PY
+replace_once "$SRC/gnu/services/shepherd.scm" \
+  '      ;; Start shepherd.' \
+  's|      ;; Start shepherd\.|      ;; Start shepherd.  Log to the console so boot failures are visible.|'
+replace_once "$SRC/gnu/services/shepherd.scm" \
+  '#$(shepherd-configuration-file services shepherd)))))' \
+  's|#\$(shepherd-configuration-file services shepherd)))))|#\$(shepherd-configuration-file services shepherd)\n             "--logfile" "/dev/console"))))|'
 
 # Make the kernel verbose by default (drop 'quiet').
-python3 - "$SRC" <<'PY'
-import sys
-from pathlib import Path
-p = Path(sys.argv[1]) / "gnu/system.scm"
-s = p.read_text()
-old = '''        "quiet"))'''
-new = '''        "verbose"))'''
-assert s.count(old) == 1, f"expected one 'quiet' kernel arg, found {s.count(old)}"
-p.write_text(s.replace(old, new, 1))
-print("patched %default-kernel-arguments")
-PY
+replace_once "$SRC/gnu/system.scm" \
+  '        "quiet"))' \
+  's|        "quiet"))|        "verbose"))|'
 
 # Point the channel's keyring-reference at the main branch. The keyring is
 # loaded (unconditionally) but never used for verification, because
 # first-signed-commit equals the channel commit (an empty commit range). So an
 # empty keyring off the 'patched' branch is fine and avoids needing a separate
 # keyring branch that libgit2 refuses to fetch.
-python3 - "$SRC" <<'PY'
-import sys
-from pathlib import Path
-p = Path(sys.argv[1]) / ".guix-channel"
-s = p.read_text()
-old = '''(keyring-reference "keyring")'''
-new = '''(keyring-reference "patched")'''
-assert old in s, "keyring-reference not found in .guix-channel"
-p.write_text(s.replace(old, new, 1))
-print("patched .guix-channel keyring-reference")
-PY
+replace_once "$SRC/.guix-channel" \
+  '  (keyring-reference "keyring")' \
+  's|  (keyring-reference "keyring")|  (keyring-reference "patched")|'
+
+# Make connman verbose: run it with --debug and send its output to the console
+# instead of /var/log/connman.log, so a networking hang explains itself.
+replace_once "$SRC/gnu/services/networking.scm" \
+  '"--nodnsproxy"' \
+  's|"--nodnsproxy"|"--nodnsproxy" "--debug"|'
+replace_once "$SRC/gnu/services/networking.scm" \
+  '#:log-file "/var/log/connman.log"' \
+  's|#:log-file "/var/log/connman\.log"|#:log-file "/dev/console"|'
+
+# Make the installer's `guix system init` verbose so its progress (substitute
+# downloads, builds) is visible instead of a silent hang.
+replace_once "$SRC/gnu/installer/final.scm" \
+  '"--fallback"' \
+  's|"--fallback"|"--fallback" "--verbosity=3" "--max-silent-time=120"|'
+
+# The installer normally runs the final `guix system init` in a PTY.  That is
+# nicer for progress bars, but it makes this failure mode harder to diagnose
+# when the newt screen goes blank.  For this debug image, use the plain pipe
+# path and print the exact command right before it runs.
+replace_once "$SRC/gnu/installer/final.scm" \
+  '(set! ret (run-command install-command #:tty? #t)))' \
+  's|(set! ret (run-command install-command #:tty? #t)))|(installer-log-line "debug: final install command: ~s" install-command)\n             (format #t "debug: final install command: ~s~%" install-command)\n             (force-output)\n             (set! ret (run-command install-command #:tty? #f)))|'
+
+# Log every line the installer's commands print to the installer log, so the
+# full install output is captured and visible.
+replace_once "$SRC/gnu/installer/utils.scm" \
+  '(list display)' \
+  's|(list display)|(list display %installer-log-line-hook)|'
 
 # Sign the patched tree as an orphan commit (no parent), so that guix pull's
 # clone never tries to fetch the pinned commit's absent parent.

pull.sh

@@ -4,7 +4,19 @@ set -euo pipefail
 export PATH="/var/guix/profiles/per-user/root/current-guix/bin:${PATH}"
 
 # Clone + verify + patch + sign the pinned Guix, producing /tmp/channels-local.scm.
-bash /workspace/patch.sh
+# patch.sh is idempotent (it re-clones from scratch each time), so retry the
+# whole thing to ride out transient segfaults in the container's python3.
+PATCH_OK=0
+for attempt in $(seq 1 3); do
+  echo "patch: attempt ${attempt}/3"
+  if bash /workspace/patch.sh; then
+    PATCH_OK=1
+    break
+  fi
+  echo "patch.sh failed (exit $?); retrying in 5s..." >&2
+  sleep 5
+done
+[ "${PATCH_OK}" = "1" ] || { echo "patch.sh failed after retries" >&2; exit 1; }
 
 DAEMON_PID=""
 start_daemon() {

start.sh

@@ -0,0 +1,22 @@
+#!/usr/bin/env bash
+set -euo pipefail
+
+FW_DIR="/Applications/UTM.app/Contents/Resources/qemu"
+DIR="$(cd "$(dirname "$0")" && pwd)"
+
+# Create the 64 MiB NVRAM vars flash from the EDK2 template on first run.
+if [ ! -s "$DIR/blank-vars.fd" ]; then
+  cp "$FW_DIR/edk2-arm-vars.fd" "$DIR/blank-vars.fd"
+  truncate -s 64M "$DIR/blank-vars.fd"
+fi
+
+exec qemu-system-aarch64 \
+  -machine virt \
+  -accel hvf -cpu host -smp 4 -m 4096 \
+  -drive if=pflash,format=raw,readonly=on,file="$FW_DIR/edk2-aarch64-code.fd" \
+  -drive if=pflash,format=raw,file="$DIR/blank-vars.fd" \
+  -drive if=virtio,format=qcow2,file=/Users/morkswork/Downloads/guix-install-aarch64-linux.qcow2 \
+  -drive if=virtio,format=qcow2,file="$DIR/blank-32g.qcow2" \
+  -nic user,model=virtio-net-pci \
+  -display none -serial stdio -monitor none \
+  "$@"